Kenworth recalls 982 new trucks because a missing driveline snap ring can let the bearing cup separate

PACCAR is recalling 982 new 2027 Kenworth trucks because a snap ring may be missing from the driveline’s slip yoke. Without that ring, the bearing cup can separate from the driveline. The Kenworth driveline recall covers five model lines, and dealers will inspect and replace the driveline for free.

PACCAR filed the campaign with the National Highway Traffic Safety Administration on November 11, 2026. NHTSA lists it as recall 26V743000, while PACCAR’s own number for it is 26PACK. Every truck in the campaign is a 2027 model, so these are trucks early in their working lives.

A snap ring is a small part. On a loaded truck, however, losing the driveline is a big problem. It can take away drive power and leave heavy parts lying on the road.

Which trucks are in the Kenworth driveline recall

A Kenworth T680, a model line in the Kenworth driveline recall
Image Credit: Elise240SX – CC BY-SA 4.0/Wiki Commons

The NHTSA recall record for 26V743000 carries one entry for each of five 2027 Kenworth models:

  • Kenworth T280
  • T380
  • T680
  • T880
  • W990

That list spans a wide range of work. On one end sit the T280 and T380. When Kenworth launched its new medium-duty range in 2021, Transport Topics reported a weight rating of up to 26,000 pounds for the T280. It called the T380 a Class 7 truck rated at up to 33,000 pounds. The same report described the new range as running from Class 5 medium-duty trucks up through Class 8.

On the other end sit the larger T680, T880 and W990. As a result, the recall reaches from medium-duty work trucks to some of the biggest trucks Kenworth sells.

The filing counts 982 trucks that could be affected. It does not say how many of them actually left the plant without the ring. Instead, it covers every truck that might have the problem.

How a missing clip lets the bearing cup work loose

Think of a driveshaft as a steel tube with a joint at each end. One end has to change length slightly as the axle rides up and down, so it slides on splines inside a slip yoke. That sliding section is where this Kenworth problem lives.

Each universal joint rides in small bearing cups pressed into the yoke ears. A snap ring is the C-shaped retaining clip that locks a cup in place. If the clip was never fitted, nothing stops the cup from walking outward under vibration and torque.

That is exactly the failure PACCAR describes. In its summary to NHTSA, the company says the drivelines may be missing a snap ring in the slip yoke assembly, which can let the bearing cup separate from the driveline. In other words, a part worth pocket change can undo a whole driveshaft.

What happens if the driveline comes apart

PACCAR’s filing spells out the outcome in two parts. A separated driveline can mean a loss of drive power, and with it a higher chance of a crash. On top of that, pieces that break free can end up on the road in front of other drivers.

Picture that on a busy highway. A tractor that suddenly can’t pull while merging, or halfway up a grade, leaves its driver with very few options. Then a spinning driveshaft hitting the pavement becomes a danger to every car behind it.

So far, PACCAR’s report lists no crashes or injuries tied to the missing ring.

The same fault turned up at Daimler a week earlier

This is the second snap-ring driveline recall on new heavy trucks in a week. On November 6, 2026, Daimler Trucks North America filed NHTSA recall 26V737000. That campaign covers 3,894 2027 Freightliner and Western Star trucks with Cummins drivelines.

The wording is close. In the Daimler case, the slip yoke assembly may be missing a snap ring, and the driveline could separate from the truck. However, the two records differ on the fix. Cummins handles the Daimler repair, while Kenworth dealers handle this one.

Neither record names a shared supplier, so we won’t guess at one. Still, if you run a mixed fleet of 2027 trucks, both campaigns are worth checking at the same time.

Getting the free inspection

Kenworth dealers will handle the work. Under the remedy PACCAR filed, a dealer inspects each driveline and replaces it if needed, at no cost to the owner.

Official letters should start reaching owners on January 10, 2027, and NHTSA’s VIN lookup will show affected trucks from the same day. Until then, Kenworth’s customer line is 1-425-828-5888, and the company’s campaign code to quote is 26PACK.

If you run a fleet, there’s no reason to sit on this. First, filter your roster for 2027 T280, T380, T680, T880 and W990 units. Next, ask your Kenworth dealer to check the slip yoke on each one during its next scheduled visit.

Independent trackers carry the same details. For example, RecallBench’s entry for 26V743000 shows 982 trucks across the same five models under PACCAR’s 26PACK code.

For the record, PACCAR reported the defect to NHTSA on November 11, 2026, and its owner letters are scheduled for January 10, 2027.

More from Fast Lane Only

Bobby Clark Avatar