5 Princess models still relevant

The Princess name has worn three different badges. Austin used it on big limousines, Vanden Plas put it on plush saloons, and British Leyland turned it into a brand for its 1975 wedge. Few nameplates have covered that much ground.

These five are our picks for the Princess models that matter to classic fans today. The verdicts are our take, while the dates, engines and build numbers are checked against owners’ club histories and other references.

1. Vanden Plas Princess saloon

A Vanden Plas Princess saloon
Image Credit: Dietmar Rabich – CC BY-SA 4.0/Wiki Commons

The Princess 3 Litre made its debut at the October 1959 Earls Court Motor Show. Then, in July 1960, the Austin name came off and it became the Vanden Plas Princess. At first, its 2,912 cc C-series six made 108 bhp, and the Mark II of October 1961 raised that to 120 bhp. The Mark II also brought picnic tables for the rear passengers and a slightly longer wheelbase. According to the Vanden Plas Owners Club, Vanden Plas built 4,715 Mark Is and 7,901 Mark IIs. In our view, it showed how much luxury a mid-size BMC saloon could carry.

2. 1967 Vanden Plas Princess 4-Litre R

A 1967 Vanden Plas Princess 4-Litre R
Image Credit: Hugh Llewelyn – CC BY-SA 4.0/Wiki Commons

The 4-Litre R arrived in August 1964 with a surprise under the hood. Rolls-Royce supplied its FB60 engine, a 4-liter six with an alloy block rated at 175 bhp. A Borg-Warner automatic and Hydrosteer power steering came as standard. The club notes that Rolls-Royce and BMC had also worked on a Bentley codenamed Java, but the firms dropped that project. However, reliability problems hurt sales, and Vanden Plas built only 6,999, counting kits sent to South Africa. Even so, a Rolls-Royce engine in a BMC saloon is a story car fans keep telling, so it earns its place here.

3. 1967 Vanden Plas Princess 4-Litre Limousine

A 1967 Vanden Plas Princess 4-Litre Limousine
Image Credit: andreboeni – CC BY 2.0/Wiki Commons

This long car began life as the Austin A135 Princess Limousine at the 1952 Earls Court show. By 1960, it carried the Vanden Plas Princess 4 Litre Limousine name, with a 3,993 cc D-series six. The Royal Household bought the first two for the new Queen and repeated that order three more times. In total, about 3,238 left the line before production ended in May 1968. After that, the Daimler DS420 took over the job. That royal link keeps it relevant, because the last two royal cars survive at Sandringham and the British Motor Museum in Gaydon.

4. 1978 Princess 2200 HLS

A 1978 Princess 2200 HLS
Image Credit: Kieran White – CC BY 2.0/Wiki Commons

British Leyland launched the 18-22 series on March 26, 1975, with angular wedge styling by Harris Mann. That September, the range became a brand of its own called Princess. The 2200 used a smooth 2,227 cc overhead-cam six with a claimed 110 bhp. Those engines came from the ADO17 family, which our 1968 Austin 1800 story covers. The Leyland Princess club calls a late-seventies 2200 HLS probably the best model to buy. However, it also warns that the six is the most fragile engine, so service history matters.

5. 1979 Princess HL

A 1979 Princess HL
Image Credit: DeFacto – CC BY-SA 2.5/Wiki Commons

In July 1978, the Princess 2 replaced the old 1.8-liter B-series engine with new 1.7- and 2.0-liter O-series units. Every wedge rode on Hydragas suspension, and the owners’ club says the ride should feel smooth and comfortable, especially on later cars. The big flaw was the tail. Harris Mann drew a hatchback, but management kept a separate trunk so the Maxi stayed the range’s only hatch. Production ended in November 1981, and the Austin Ambassador added the missing hatch. To us, the HL is the everyday wedge, which is why a clean one is relevant now.

Sources: the Vanden Plas Owners Club histories of the Princess 3 Litre, the Princess 4 Litre R and the A135 Princess Limousine, plus the Leyland Princess and Ambassador club buyer’s guide.

More from Fast Lane Only

Bobby Clark Avatar